Compact and perfectly balanced, the GRAVELY Rotary Saw is easy to handle no matter what your sawing job.
The Saw has two positions, vertical and horizontal. A bolt-secured locking
mechanism assures you of a rigid, safe mounting. In the Horizontal position you clear land
or fell timber up to 18 inches or more through. When the Saw is in the Vertical position
you can trim and cut the felled timber with ease.
You take the Saw to the job under its own power. No carrying or setting up to
do-just run the saw up to the job, put the attachment in gear and let the saw do the work
26 inch Saw Blade of Grade A Steel. The blade is file temper, for easy sharpening
in the field. Teeth have a Cordwood Set, which gives you a wide "bite", helps prevent
binding by giving the blade plenty of room to follow the teeth into the cut.
PLENTY OF POWER WITH THE 5 HP GRAVELY
A saw is only as good as its power plant. The powerful 5 HP 4-cycle engine of the
GRAVELY Tractor packs plenty of power for the toughest sawing jobs-proved by many
tests and the satisfaction of GRAVELY users.
There is no loss of power with the GRAVELY, because both the tractor and the
attachment are gear driven direct from the motor of the Tractor. No belts or chains to slip,
break or wear!
The GRAVELY has an automotive-type transmission running in a bath of oil. This
means that you have one-spot lubrication, and long life from your machine.
Maneuvering the GRAVELY is easy, because you have throttle-controlled speeds,
two forward and two REVERSE. No tugging or pulling to get into position with the
GRAVELY, the tractor does the work.
There is no danger of damage to your saw or to the tractor by a sudden pinch of the
blade or by striking obstacles. Instead, the GRAVELY slip clutch protects your attachment
and tractor by slipping a quarter turn, dissipating the shock, and stalling your machine
before any damage has been done.
ONE OF 19 ATTACHMENTS
Remember that the Rotary Saw Attachment is only one of 19 time and labor saving tools for use with the powerful 5 HP GRAVELY Tractor. These include: 42 inch Sickle Mower for brush and weeds; 30 inch Reel Mower; 25 inch Gang Units which, when attached to 30 inch unit, gives you a mower that cuts a 72 inch swath; Hauling Cart, 1/2 ton capacity; Riding Sulky; Sprayer; power-driven Rotary Plow; Cultivating #59; Snow Plow; Power Brush; and others. Ask for New Catalog, Power vs. Drudgery.
L TRACTOR SPECIFICATIONS
MOTOR: Own make; 4-cycle, T-Head
Type; Air Cooled; removable Head.
BORE: 3 1/4" STROKE 3½". (Ring
Clearance .012.) Mechanical Valves.
(Tappett Clearance .008.)
AIR CLEANER: Donaldson Oil Bath.
OIL FILTER: A. C. or equivalent.
HORSEPOWER: 5 H. P. at 1640 RPM.
BEARINGS: Timken, Norma-Hoffman,
New Departure, SKF, Fafnir, Phospho-
Bronze, or equivalent brand.
TRANSMISSION GEARS AND TIMING
GEAR: Alloy Iron and Hardened
DIFFERENTIAL: Automotive Gear Type.
Hardened Steel Cut Pinions, Steel,
Worm, Bronze worm gear.
OILING: Dry Sump Gear Pump and Splash
CLUTCH: Two Double Acting Cone Type
Clutches. One as Speed Selector, other
giving forward and reverse motion. Each
Power Attachment has Individual Safety Slip
HEIGHT: Not including handles, 28".
LENGTH: Tractor and handles, 58".
WEIGHT: Tractor, 275 pounds.
SPEEDS: Two Forward Speeds and Re-
verse. Low speed ¼ to 3 miles per hour.
High speed 1 to 6 miles per hour. Throttle
GAS: Capacity 2 gallons. Enough for 8
OIL: Capacity 5 pints.
ROTARY SAW SPECIFICATIONS
BLADE: Circular Type, Grade A Steel File
Temper, Cordwood Teeth.
POSITIONS: Two, Vertical and Horizontal.
Locked in either position by locking device
and securing bolt.
DRIVE: Bevel Gear and Spine steel
Shafts. Safety Slip Clutch protected.
CASTINGS: Malleable or Grey Iron.
BEARINGS; Timken or equivalent.
RPM: Blade RPM, 1400.
See your GRAVELY Dealer for a demonstration of the GRAVELY
Tractor and its Rotary Saw Attachment. No oblication, of
course. Or write direct for more information.
GRAVELY MOTOR PLOW AND CULTIVATOR COMPANY
DUNBAR, WEST VIRGINIA